“Switch 2 grip” means two different things, and Amazon’s search results mix them together. The first is a grip case: a shell the whole console sits in, with handles moulded on the back, so that handheld play feels like holding a controller instead of a tablet. The second is a Joy-Con 2 grip: a frame the two detached controllers slide into, so they become one gamepad for the sofa, the way the plain grip in the Switch 2 box does. Most of the frustration in the reviews for either kind comes from buying one when you wanted the other, so this guide sorts them first and ranks them second.
Every grip here was checked live on Amazon on the day of writing, and the price and stock under each heading come from Amazon’s own data, refreshed on a schedule, rather than from this text. Every claim in an entry (whether it docks with the case on, whether the Joy-Cons come off without removing it, whether the kickstand still works, what it weighs) is taken from that product’s listing and presented as the maker’s claim; where a listing is silent, the entry says so. Seven grip cases and three Joy-Con 2 grips, chosen by review history and by what their listings actually document.
If what you want is a different controller altogether rather than a grip for the ones you have, the third-party Joy-Cons and Switch 2 controllers guide on this site covers the Switch 2 tier and the originals, and includes a short grips table that this page expands.
Disclosure: As an Amazon Associate I earn from qualifying purchases. Product links in this guide are affiliate links.
Grip case or Joy-Con grip: which one you are shopping for
A grip case solves the Switch 2’s size. The console is wider and heavier than the original Switch, and after an hour of handheld play the flat back and the thin edges tell. A grip case adds two handles and, in most designs, a hard shell that takes the knocks. The questions that matter are whether it docks with the case still on (most of the picks here say yes, one needs its front cover removed), whether you can pop the Joy-Con 2s off without taking the case off (four of the seven say yes), and whether the console’s kickstand still opens (one listing says no). The best-known names are Satisfye and Skull & Co, whose grips are the two the Reddit threads argue about; Belkin, Spigen and SUPCASE are better known for phone cases.
A Joy-Con 2 grip is for the other way of playing. Slide the two controllers off the console, slide them into the grip, and you have a gamepad for TV mode. Nintendo includes a plain one in the box; the aftermarket adds charging grips that top the controllers up while you play, and split grips that snap a handle onto each Joy-Con 2 and stay on when they go back on the console. If you already have a Pro Controller, you do not need one of these; if the family plays on the TV with the Joy-Cons, a charging grip is the accessory that ends the “which controller is dead” problem.
The ten at a glance
| Pick | Best for | Type | Docks with it on (listed) | Joy-Cons off without removing it (listed) | Kickstand (listed) | Price | Stock | |
|---|---|---|---|---|---|---|---|---|
 | 1. Satisfye ZenGrip 2 | The grip the long-session players buy | Handheld grip | Yes | Not stated | Not stated | $48.99 | In stock |
 | 2. Savage Raven by Skull and Co NeoGrip | The one with three grip sizes in the box | Handheld grip, hard shell | Yes | Not stated | Accessible | $29.99 | In stock |
 | 3. SUPCASE Unicorn Beetle Pro | The protective case with the most reviews | Handheld case | Yes | Yes, hinge | Not compatible | $29.99 | In stock |
| 4. Spigen Dual Grip | The cheapest case here | Handheld case | Yes | Not stated | Compatible | See on Amazon | ||
| 5. Belkin Grip Case | The quick-release grip with a kickstand mode | Handheld grip case | Yes | Yes, quick-release | Kickstand mode | See on Amazon | ||
 | 6. Belkin Grip Charging Case | The grip with a power bank on its back | Handheld grip case with power bank | Yes | Yes, quick-release | Kickstand mode | $99.99 | In stock |
| 7. JSAUX GoJoy Dockable Case | The case with its own metal kickstand | Handheld case | Yes, front cover off | Yes | Own metal stand to 70 degrees | See on Amazon | ||
 | 8. Nintendo Joy-Con 2 Charging Grip | Nintendo's own charging grip | Joy-Con 2 grip | n/a | n/a | n/a | $39.88 | In stock |
| 9. IFYOO NexGrip Grip Set | The budget pair for Joy-Con 2 | Joy-Con 2 grip pair | Yes, while charging | n/a | n/a | See on Amazon | ||
| 10. MystiForge Split Grips | The split grips that stay on | Joy-Con 2 split grips | Yes | n/a | n/a | See on Amazon |
Prices and availability as of 03:08 EST – details
Handheld grip cases
1. Satisfye ZenGrip 2
The ZenGrip is the grip that people who play handheld for hours keep recommending, and its review history on Amazon is several times longer than any other grip on this page. The design is asymmetrical, in the listing’s word, and its whole pitch is that it replicates the feel of a pro controller in handheld mode. This version is cut for the Switch 2 only. The listing states anti-scratch silicone tabs that keep the console from touching the grip itself and leave a gap for warm air to escape from the back, and it states that the ZenGrip 2 series docks in the original dock with the console still in it.
What the listing does not say is whether the Joy-Con 2s come off with the grip in place or whether the kickstand opens, so this entry claims neither. It is sold as a grip rather than a protective case, and the listing makes no protection claim beyond the silicone tabs. It costs about 60 percent more than the NeoGrip and roughly three times the Spigen, and the maker also sells it bundled with a slim carrying case for a traveller. For big hands and long sessions it is the one to buy; for a child or a commuter who wants protection first, read on.
2. Savage Raven by Skull & Co NeoGrip
The other half of the Reddit argument, and the one with a trick the ZenGrip lacks: the handles come off and swap. The listing states three interchangeable grip designs to fit different hand sizes, on a slider so they change without tools, mounted on a hard polycarbonate shell that it says provides solid protection and reduces the impact of a fall. It states that nothing is blocked (card slot, vents, buttons or the kickstand on the back), and that it is dock-friendly with no need to remove it. The two names, Savage Raven and Skull & Co, appear together on the listing.
Buy the NeoGrip over the ZenGrip if more than one person uses the console, or if you are not sure what size of handle suits you: the three grips in the box answer that question at home instead of at checkout. It is the third most-reviewed grip here and sells at the same point as the SUPCASE and JSAUX cases, about 40 percent below the ZenGrip. The listing is silent on removing Joy-Cons with the shell in place; the hard shell suggests they come off with it, but this page does not claim it.
3. SUPCASE Unicorn Beetle Pro
The protective case first and the grip second, and the most-reviewed case on this page after the ZenGrip. SUPCASE’s listing states a hinge mechanism that lets the Joy-Con 2s come off and go back on quickly while the case stays put, a dock-compatible design, an anti-slip rubberised texture, a 2.5 mm raised bezel around the screen, a stated weight of 139 grams, and a drop-protection claim to the MIL-STD-810G 516.6 standard, which is the only drop standard any listing on this page names. The shell is Bayer polycarbonate, per the listing.
The listing also states that it is not compatible with the Switch 2’s kickstand, and it is the only pick here that says so. If you play in tabletop mode, that rules it out; if the console belongs to a child who drops things, that is the trade you make for the only drop rating in the list. Same price as the NeoGrip; the choice between them is protection against adjustable comfort.
4. Spigen Dual Grip
The cheapest case on this page, from the phone-case brand, and a sensible first grip for anyone who is not sure they want one. The listing states a hard polycarbonate back with a flexible TPU bumper on the corners and edges, two raised grip zones rather than full handles, and cutouts for every stick, button, trigger, speaker, the card slot and both USB-C ports. It states that it works in all three modes without being removed: handheld, tabletop on the kickstand, and docked in the official dock in TV mode. It is cut for the Switch 2 only, not the original Switch, Lite or OLED.
Two raised zones are not the same as the ZenGrip’s handles, and the listing does not state whether the Joy-Con 2s detach with the case on. What it offers is a slim, dockable, kickstand-friendly case for roughly a third of the ZenGrip’s price. If the console is new and you want to protect it before you decide how you play, start here and move up later.
5. Belkin Grip Case
Belkin’s grip answers all three of the questions that matter on its own listing: it docks with the case on, the Joy-Con 2s come off without removing the grip (the listing calls it quick-release), and a kickstand mode gives tabletop play. It states a textured non-slip surface, a design made exclusively for the Switch 2, compatibility with Belkin’s own travel bag, construction from a minimum of 75 percent recycled plastic, and two years of coverage.
It is a newer listing with a short review history, which is why it sits fifth rather than higher, and it costs a little more than the NeoGrip. Buy it for the quick-release and the warranty from a brand with a service department; buy the NeoGrip if adjustable handles matter more. The same grip with a power bank attached is the next entry, and if you are tempted by that, read it before deciding.
6. Belkin Grip Charging Case
The only grip on this page with a battery. It is the Belkin grip above with a magnetic 10,000 mAh power bank that snaps to the back, which the listing says delivers up to 30 watts and recharges the Switch 2 up to one and a half times, through an integrated USB-C cable, with a digital display for the battery level. Everything else carries over from the plain grip: dockable, quick-release Joy-Cons, kickstand mode, recycled plastic, two years of coverage. The maker’s “1.5 charges” is the maker’s figure and depends on what you are playing.
It is the most expensive item on this page, more than two and a half times the plain Belkin grip and nearly twice the ZenGrip, and that premium is the price of a 10,000 mAh bank that fits the back of a console; a generic power bank and a cable cost less and do not clip on. It is the pick for long flights and for a child’s console on a road trip, and for no one else.
7. JSAUX GoJoy Dockable Case
JSAUX makes the case for people who have given up on the Switch 2’s own kickstand. The listing states a fold-away aluminium stand on a metal hinge that holds angles up to 70 degrees, with a tuned 0.8 newton-metre torque and a hinge tested for 3,000 open-and-close cycles. It is a split design: a rigid front cover with eight game-card slots protects the screen and covers the L and R buttons in transit, and to dock you remove the JoyPads from the shell, take the front cover off and slide the console in. The listing states ergonomic handles with an anti-slip texture.
It has the thinnest review record of the seven cases, and docking is a two-step job rather than a slide. In return it is the only pick with a stand of its own and the only one that stores cartridges. Priced with the NeoGrip and SUPCASE; the right pick for tabletop players and travellers, a wrong one for anyone who docks several times a day.
Joy-Con 2 controller grips
8. Nintendo Joy-Con 2 Charging Grip
The benchmark. The grip in the Switch 2 box holds the two Joy-Con 2s as one controller but does not charge them; this one does, over the included USB cable, so the controllers top up while the family plays on the TV. The listing states the extra GL and GR buttons on the back, which can be mapped to any input, and that it is for the Switch 2 only. It is Nintendo’s own accessory, so the fit, the rails and the charging contacts are the ones the controllers were designed around.
One thing to know before clicking: the Amazon listing read for this guide was sold by Amazon Resale, which is Amazon’s returned and open-box programme, and the stock behind the button may change. If it shows a third-party seller or Nintendo itself when you look, the product is the same. It costs a little more than the Belkin grip case and about twice the NexGrip pair below, which is the price of charging built in and Nintendo’s name on it.
9. IFYOO NexGrip Grip Set
The budget answer for anyone who finds a bare Joy-Con 2 too small for a whole evening, and the pair already recommended in this site’s controller guide. It is two grips, one left and one right, that each hold a Joy-Con 2 and give it a handle, and the listing is clear that it contains nothing else: no console, no controllers. It states an ergonomic shape with an anti-slip texture to reduce strain in long sessions, and that the grips do not need removing when the console charges on its dock, which is the point of a split design over a single frame.
Its listing describes no charging, and it does not join the controllers into one gamepad; it makes each of them comfortable on its own, for two-player games on one console. Among the three Joy-Con grips it is tied cheapest with the MystiForge pair below, at less than half the Nintendo grip, and its rating is tied for the highest among the aftermarket picks here.
10. MystiForge Split Grips
The lighter take on the same idea. The listing states curved TPU grips at approximately 53 grams for the pair, the only weight figure among the Joy-Con grips here, that snap on and off a Joy-Con 2 in seconds, with a laser-textured back for grip when hands get warm. It states that the console docks with the grips still on, that wrist straps still attach for motion games, and that the cut leaves the front and shoulder buttons clear. With SUPCASE, it is one of only two picks here whose listing states a weight.
Same price and the same rating as the NexGrip; the difference is material and weight. The MystiForge listing names its material and weight; the NexGrip listing names neither, so that is the comparison the records allow. Pick the MystiForge if the controllers stay on the console most of the time, the NexGrip if they mostly live in hands.
How to choose a Switch 2 grip
Does it dock with the grip on?
Every grip case here states that it docks, which was not true of the first generation of Switch grips and is the single biggest improvement in the category. The exception to watch is the JSAUX, which docks only once the front cover is off. If you dock daily, a grip that slides straight into the dock is worth more than any other feature on this page.
Can the Joy-Con 2s come off?
Four listings state it plainly (SUPCASE with its hinge, both Belkins with quick-release, JSAUX); the ZenGrip, NeoGrip and Spigen listings do not say either way, so this guide does not claim it for them. The Switch 2’s magnetic rails make detaching easier than the old slide rails, and a case that covers the release button defeats that.
Kickstand, weight and hand size
One listing (SUPCASE) says its case blocks the kickstand; one (JSAUX) replaces it with a metal stand of its own; the Spigen, NeoGrip and Belkins state that the kickstand still works. Only two listings give a weight at all, which is a gap across the category. On hand size, the NeoGrip’s three swappable handles are the only adjustable option, and the ZenGrip’s asymmetrical shape is built for larger hands; if you are buying for a child, the Spigen’s low-profile zones or the Belkin are the safer shapes.
What a grip will not fix
Stick drift, battery life and the Joy-Con 2’s small sticks. A grip makes the console or the controllers more comfortable to hold; it does not change how they play. For a bigger, better controller the Switch 2 controller guide is the place, and for a gift that is not a controller at all, the MP3 players with Spotify on this site are the other thing teenagers ask for this year.
Frequently asked questions
Does the Switch 2 come with a grip?
It comes with the plain Joy-Con 2 grip, which joins the two controllers into one gamepad and does not charge them. The charging grip is sold separately (entry 8 here). No handheld grip case is included; that is what entries 1 to 7 are for.
ZenGrip or NeoGrip?
ZenGrip for one adult with large hands who plays long handheld sessions and wants a controller-like grip; NeoGrip for a shared console or an undecided hand size, because the three swappable handles let you choose at home, and for anyone who wants a hard shell around the console for less money.
Will a Switch 2 grip case fit in the dock?
Every case on this page states that it docks, six of them with the case as it is and the JSAUX with its front cover removed. Original-Switch grips do not fit the Switch 2 at all; the console is a different size.
What is a split grip?
A handle that attaches to each Joy-Con 2 separately (entries 9 and 10) rather than a frame that joins them. Split grips stay on when the controllers go back on the console and when it docks; a joining grip has to come off.
Related guides
Gaming and gifts on this site: the best third-party Joy-Cons and Switch 2 controllers and the best MP3 players with Spotify.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.